How to Replace Your Ram 3500 Brake Pads

August 26th, 2019 by

RAM300

There’s no denying the Ram 3500 is the truck you want to drive. No compromises here when it comes to performance, capability, and good rugged looks. But to enjoy all these features, you’ll need to keep your brake pads fresh. After all, you can’t drive with bad brakes. So, here’s a quick guide to know when and how to replace your Ram 3500 brake pads.

 

What Are Your Brake Pads?

 

Your brake pads help you come to a complete stop without any problems.

 

To be specific, they’re a material atop a steel plate that create friction to stop your truck. Whenever you push your brakes, this material rubs against your brake rotor. And it’s this action that prevents you from spinning out of control any time you put your foot to that brake pedal.

 

But, over time, this material wears. Thus, you’ll want to get your pads replaced to continue your safe commutes and adventures.

 

When Should You Replace Your Brake Pads?

 

You’ll need to replace your brake pads over time. Thankfully, your Ram 3500 does a great job of letting you know when it’s time to change out your pads.

 

  • After 20,000 – 40,000 miles

 

This range is a good rule of thumb for Ram 3500 brake pad replacement. Yet, this number depends on your driving style and conditions. For example, if you heavy brake at high speeds while traveling downhill, expect to change out your brake pads closer to that 20k mileage mark.

 

Nonetheless, if you find yourself in this range since your last pad replacement, consider investing in some new brake pads.

 

  • Loud Screeching When Braking

 

It’s that loud obnoxious sound of metal scraping on metal. You’ll definitely hear it when it happens. And the cause is that friction material wearing off your brake pads. When you hear this sound, it’s time to replace your brake pads ASAP.

 

  • Less than ¼ inches of brake pad remaining

 

Take a look at your brake pads through your tire spokes. When you have less than ¼ inches of pad remaining, you’ll want to get some new brake pads before that loud squealing begins.

 

How Do You Replace Your Brake Pads?

 

Now for the important part—Ram 3500 brake pad replacement. For this step, you’ll want to give yourself between 2-4 hours. But after you’ve done it once, it gets easier with time.

Note: It helps if you work on 1 side of your Ram 3500 at a time.

  1. Raise your Ram 3500 with a jack and secure it on a jack stand.

For this step, you’ll also want to ensure your Ram is fully supported on the jack stand before you begin any work. From there, you can loosen your lug nuts.

  1. Remove the lug nuts and wheels.
  2. Pull your calipers away from your pads and rotors (removing the calipers in the process).

It helps if you use something like a bungee cord to secure the caliper so that it’s out of the way. Ideally, you won’t leave it hanging idly from the brake line.

  1. Remove the bracket fasteners.

You’ll remove the caliper bracket with the pads still attached. Also, make a note of the orientation of the pads inside the bracket—you’ll need to replicate this for your replacement pads. But after you’ve recorded the orientation, you can remove the brake pads.

  1. PuT your brake pads in place and repeat the above process in reverse.

Of course, you’ll also repeat this process on the other side of your Ram 3500.

RAM 3500

Get Your Ram 3500 Brake Pad Replacements from Blake Fulenwider Chrysler Dodge Jeep in Clyde, TX

There’s no need to buy your brake pad replacements from sketchy websites with off-brand parts. Instead, visit our site and search for genuine Ram 3500 parts. We sell authentic OEM parts. So, you know everything will fit as intended on your Ram 3500.  And if you need some help along the way, feel free to schedule service with the Blake Fulenwider Chrysler Dodge Jeep service center.

Sources:

https://www.yourmechanic.com/estimates/ram/3500/brake-pads-replacement

There’s no denying the Ram 3500 is the truck you want to drive. No compromises here when it comes to performance, capability, and good rugged looks. But to enjoy all these features, you’ll need to keep your brake pads fresh. After all, you can’t drive with bad brakes. So, here’s a quick guide to know when and how to replace your Ram 3500 brake pads.

What Are Your Brake Pads?

Your brake pads help you come to a complete stop without any problems.

To be specific, they’re a material atop a steel plate that create friction to stop your truck. Whenever you push your brakes, this material rubs against your brake rotor. And it’s this action that prevents you from spinning out of control any time you put your foot to that brake pedal.

But, over time, this material wears. Thus, you’ll want to get your pads replaced to continue your safe commutes and adventures.

When Should You Replace Your Brake Pads?

You’ll need to replace your brake pads over time. Thankfully, your Ram 3500 does a great job of letting you know when it’s time to change out your pads.

• After 20,000 – 40,000 miles

This range is a good rule of thumb for Ram 3500 brake pad replacement. Yet, this number depends on your driving style and conditions. For example, if you heavy brake at high speeds while traveling downhill, expect to change out your brake pads closer to that 20k mileage mark.

Nonetheless, if you find yourself in this range since your last pad replacement, consider investing in some new brake pads.

• Loud Screeching When Braking

It’s that loud obnoxious sound of metal scraping on metal. You’ll definitely hear it when it happens. And the cause is that friction material wearing off your brake pads. When you hear this sound, it’s time to replace your brake pads ASAP.

• Less than ¼ inches of brake pad remaining

Take a look at your brake pads through your tire spokes. When you have less than ¼ inches of pad remaining, you’ll want to get some new brake pads before that loud squealing begins.

How Do You Replace Your Brake Pads?

Now for the important part—Ram 3500 brake pad replacement. For this step, you’ll want to give yourself between 2-4 hours. But after you’ve done it once, it gets easier with time.

Note: It helps if you work on 1 side of your Ram 3500 at a time.

1. Raise your Ram 3500 with a jack and secure it on a jack stand.

For this step, you’ll also want to ensure your Ram is fully supported on the jack stand before you begin any work. From there, you can loosen your lug nuts.

2. Remove the lug nuts and wheels.

3. Pull your calipers away from your pads and rotors (removing the calipers in the process).

It helps if you use something like a bungee cord to secure the caliper so that it’s out of the way. Ideally, you won’t leave it hanging idly from the brake line.

4. Remove the bracket fasteners.

You’ll remove the caliper bracket with the pads still attached. Also, make a note of the orientation of the pads inside the bracket—you’ll need to replicate this for your replacement pads. But after you’ve recorded the orientation, you can remove the brake pads.

5. Put your brake pads in place and repeat the above process in reverse.

Of course, you’ll also repeat this process on the other side of your Ram 3500.

Get Your Ram 3500 Brake Pad Replacements from Blake Fulenwider Chrysler Dodge Jeep in Clyde, TX

There’s no need to buy your brake pad replacements from sketchy websites with off-brand parts. Instead, visit our site and search for genuine Ram 3500 parts. We sell authentic OEM parts. So, you know everything will fit as intended on your Ram 3500. And if you need some help along the way, feel free to schedule service with the Blake Fulenwider Chrysler Dodge Jeep service center.

Sources:
https://www.yourmechanic.com/estimates/ram/3500/brake-pads-replacement

Posted in Uncategorized